[905-0019-000] Base Plate-01
This base plate made of aluminum is used to fix the ROBOTIS Manipulator-H to a table.
Use a clamp or the holes on the plate to fix onto the plate. [Clamp not included]
■ Package Contents
Base Plate (450mm x 330mm)
Wrench Bolt(WB M3*8)
■ Installation Method
1. Fix the L-shaped angle with the bolt to the Manipulator joint #1.
2. The photo on the left is the external wiring for the arm. Label #1 shows a pair of 4P cables and power connector; these connect to joint #1 as shown on the right picture.
3. Once the connections are complete, fix the arm to the base plate as shown on the photo below.
4. Label #2 shows a 4P connector and 4 power connectors and these connect to the power expansion hub and the 4P cable connects to the extension.
5. Connect the USB2Dynamixel to the hub with the 4P cable; connect another port of the 4P hub to the extension.